Industrial Water Treatment Decoloring Agent (QE10) Chemical

Product Description

Our Decoloring Agent is a quaternary cationic polymer compound that is the only product for de-coloring, flocculating, COD decreasing, and other applications.

Usage And Package

1. The product shall be diluted with 10-40 times water and then dosed into the Wastewater directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.

2. The pH value of the waste water should be adjusted to 7-9 before being treated.

3. When the colority and COD Cr are relatively high, it can be used with the help of poly aluminium chloride, but not mixed together. In this way, the treatment cost can be lowered. Whether poly aluminium chloride is used forwards or afterwards depends on the flocculation test and the treatment process.

Storage

Precautions for safe handling:

Handling: Avoid eye contact with mists or spray. Avoid prolonged or repeated skin contact. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Keep out of the reach of children.

Conditions for safe storage, including any incompatibilities:
Decoloring Agent (QE10) can be stored at room temperature, and it cannot be exposed to the sun because it is non-flammable, non-expl osive, and not flammable.
Storage: Store under normal warehouse conditions. Keep away from ignition sources, heat, and flame.